RemoteTx Manual
remotetx.net

Transcription and CW decoding

The player can turn recordings into text on your own computer, offline:

Recording modeEngineDownload
Voice: LSB, USB, AM, FM, WFM, DVOpenAI's Whisper speech modelOnce, the first time it's needed
CW, CW-RDeepCW neural Morse decoderNone: ships with the app
RTTY and data modesSkipped

Transcription runs in a separate background process, so playback stays smooth while it works.

Transcribing#

  • TXT on the play screen (next to ☆): while it's lit, each recording is transcribed the first time it plays. The text appears as a two-line caption under the frequency and follows the audio. Click the caption to see the whole transcript; click a line there to jump to it.
  • QUICK › Transcribe This File: just this one.
  • QUICK › Transcribe All in This List: every recording in the folder, search results or bookmarks, in the background. Progress shows as ✎ n/total in the status bar. Stop Transcribing cancels it.
  • ✎ TRANSCRIBE ALL on the selected row of the date-folder list: queues every recording in that folder that has no transcript yet, without opening the folder.

If the app is closed while a Transcribe All is running, it carries on at the next start with the recordings still to do ("Continuing the transcription — n left"). Stop Transcribing cancels it for good.

Transcribed recordings show a cyan T in lists. Bookmark exports include the transcript.

Other Quick menu items: Show Transcript…, Re-transcribe This File, Delete Transcript.

Voice: Whisper#

QUICK › Speech Model chooses the model:

ModelSizeUse it for
SMALL~250 MBBest accuracy (default)
BASE~80 MBFaster, on slower computers

The model is downloaded once from Hugging Face the first time it's needed, then loaded from disk.

What to expect on HF SSB:

  • Phonetics ("November", "Bravo") and common phrases come through well.
  • Call signs are often only partly right. The call-sign finder works hard to repair them.
  • Audio is band-passed and normalised first, and the sound-effect captions and repeated lines Whisper invents from noise are removed.

Call-Sign Boost (on by default; QUICK or CALL SIGNS › LISTS) nudges Whisper towards the phonetic alphabet and spoken digits, which it otherwise often hears as ordinary words on noisy SSB. The nudge is mild on purpose: stronger settings made Whisper invent phonetics. It applies to new transcripts.

CW: DeepCW#

CW recordings are decoded by DeepCW, a neural Morse decoder by e04 (MIT licence). Everything above works the same for CW: TXT, the caption, Transcribe This File, ✎ TRANSCRIBE ALL, the database, and the CALL SIGNS screen.

  • The model (15 MB) is part of the app. Nothing is downloaded, and Whisper isn't needed.
  • The player finds the CW tone (the radio's CW pitch) by itself. DeepCW listens between 400 and 1200 Hz, so a pitch outside 450–1150 Hz is shifted to 700 Hz first. The tone is shown with the transcript, e.g. DeepCW · 600 Hz tone.
  • Characters the decoder is unsure of (noise, speech) are dropped. A recording with no CW shows No Morse decoded.
  • Only a call sent as one word counts as a call sign: DE K6ABC K gives K6ABC, never K6ABCK.
  • Speed: about a second per minute of CW on a typical PC.

Transcript database#

Every transcript is also kept in a SQLite database, transcripts.sqlite, in the app's data folder. QUICK › Transcript Database… shows what's in it and the most-heard call signs, and opens the folder.

It's a standard SQLite 3 file, so DB Browser for SQLite or the sqlite3 command line can open it.

  • The JSON files in transcripts\ are the master copy. At start-up the database picks up new or changed transcripts and drops deleted ones, so deleting transcripts.sqlite simply rebuilds it.
  • Tables: recordings (one row per transcribed file: radio, file, path, date and time, frequency, mode, RX/TX, S-meter, length, engine, full text), segments (each timed line), segments_fts (full-text index of the lines; docid = segments.id) and callsigns.
Example queries
-- lines that mention "antenna", with the time in the recording
SELECT r.file_name, r.recorded_at, r.freq, s.start_s, s.text
FROM segments_fts f
JOIN segments s ON s.id = f.docid
JOIN recordings r ON r.id = s.recording_id
WHERE segments_fts MATCH 'antenna'
ORDER BY r.recorded_at;

-- every recording where a call sign starting K6 was heard
SELECT c.callsign, r.file_name, r.recorded_at, r.freq, r.s_level
FROM callsigns c
JOIN recordings r ON r.id = c.recording_id
WHERE c.callsign LIKE 'K6%';
ℹ️Note

Models, transcripts and the database live on your computer. Nothing is written to the SD card, and no audio leaves your computer.

© RemoteTx® · remotetx.net · Manual built 2026 · Updated 2026-11-19