RemoteTx Manual
remotetx.net

Downloads

The RemoteTx SD card image for the station's Raspberry Pi, and installers for the RemoteTx desktop apps, which run on the computer you operate from.

RemoteTx SD card image#

The software for the station's Raspberry Pi, written to a micro SD card (16 GB or larger) with balenaEtcher. See Creating the RemoteTx SD card for the step-by-step guide.

VersionDownload
v2.1.22 (Raspberry Pi OS Trixie, 64-bit)RemoteTx SD card image v2.1.22
✅Tip

Normally you don't need to download the image first: in balenaEtcher choose Flash from URL and paste the address (right-click the link above and copy it), and balenaEtcher downloads and writes it in one go.

On a slower or less reliable Internet connection, it may be better to download the .zip first and then use Flash from file. The download can then finish at its own pace, a dropped connection won't interrupt the writing of the card, and you can reuse the file for more cards. There's no need to unzip it: balenaEtcher flashes the .zip directly.

After writing the card, copy your station's remotetx.conf file onto it: see Add your remotetx.conf file.

EasyConnect#

RTx EasyConnect connects N1MM, WSJT-X, HRD Logbook and other loggers to the radio you're operating through RemoteTx. See the EasyConnect overview.

SystemDownload
Windows 10 / 11 (64-bit)RTx EasyConnect v2.2.1 for Windows
macOS, Apple Silicon (M1 and later)RTx EasyConnect v2.2.1 for Mac (Apple Silicon)
macOS, IntelRTx EasyConnect v2.2.1 for Mac (Intel)

Installation steps, first launch and firewall prompts: Installing EasyConnect.

RemoteTx Icom Audio Player#

The RemoteTx Icom Audio Player plays, searches and transcribes the voice recordings Icom radios save to SD card. See the Icom Audio Player overview.

SystemDownload
Windows 10 / 11 (64-bit)RemoteTx Icom Audio Player v1.45.3 for Windows
macOS (Apple Silicon and Intel)RemoteTx Icom Audio Player v1.45.3 for Mac

Installation steps and first start: Installing the Icom Audio Player.

ℹ️Note

The installers aren't code-signed. Windows SmartScreen may warn on first run (More info → Run anyway), and macOS needs a right-click → Open the first time. The installing pages for each app have the details.

© RemoteTx® · remotetx.net · Manual built 2026 · Updated 2026-11-19